Sony HVRM35U Product Manual (HVR-M35U Operating Manuals) - Page 90
Troubleshooting
View all Sony HVRM35U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Troubleshooting Symptom Cause/Remedy When the tape is rewound to its beginning, the playback automatically starts. • The TIMER switch is set to REPEAT. t Set the TIMER switch to OFF. • You pressed the PLAY button while holding the REW button down. t If you do this, the unit rewinds the tape to its beginning and begins playback (page 12). During playback, the unit starts rewinding suddenly. • The TIMER switch is set to REPEAT. t When the TIMER switch is set to REPEAT, the unit starts rewinding at the moment when a signal for index search or a blank portion is detected. Set the TIMER switch to OFF. When the tape reaches its end, rewinding • The TIMER switch is set to REPEAT. starts automatically. t When the TIMER switch is set to REPEAT, the unit starts rewinding at the moment when the end of the tape is detected. Set the TIMER switch to OFF. The unit does not function as part of a digital non-linear editing system. • The INPUT SELECT switch is set to a setting other than HDV/DV. t Set it to HDV/DV. • The editing controller or the editing software is not compatible with the unit. t Refer to the instruction manuals of the controller or the software and consult their manufacturers. Although the i.LINK cable is connected, the image from external equipment is not displayed. t Disconnect and then reconnect the i.LINK cable correctly. • The INPUT SELECT switch is set to a setting other than HDV/DV. t Set it to HDV/DV. No image is displayed even though the video cable is connected correctly. • There are output restrictions for some [SDI/CMPNT] settings of [VIDEO OUT] in the [IN/OUT REC] menu. For details, see page 73. • The INPUT SELECT switch setting does not match the cable connected to the unit. t Set the INPUT SELECT switch to S VIDEO or VIDEO to match the cable connection. The image loses color or is distorted when you play back the tape on a television set or monitor connected to the unit. t Connect the unit to a television set or monitor that is compatible with its [60i/50i SEL] format. t Set [60i/50i SEL] in the [OTHERS] menu, according to the signal-format (page 85). is displayed on the screen. • This icon is displayed when you playback a tape recorded with 4-channel microphone recording on another device using external surround microphones. The unit does not support 4-channel microphone recording using external surround microphones. (This icon is displayed when you play back a tape recorded with external 4-channel recording using a surround microphone in DVCAM or DV (SP) format.) Chapter 6 Maintenance 90 Chapter 6 Maintenance