TEAC W-1200 Owners Manual English Francais Espanol - Page 22
Mic mixing with recording continued, Mixing tape playback when recording
View all TEAC W-1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Mic mixing with recording (continued) oo When recording a mic, we recommend using headphones for monitoring to prevent feedback.* If monitoring with speakers, be sure to lower their output volume and keep the mic away from them to prevent feedback. *Feedback explanation Feedback is when sound output from a speaker is picked up by a mic and returned causing oscillation. This could cause very loud noise that could even damage speakers. oo Silences can also be created (page 20) when recording with mic input. oo When recording a mix of the line input sound and mic input, the REC LEVEL (recording level) knob can be used to adjust the volume after mixing. 5 Follow step 2 for dubbing on page 23, and start dubbing with mic mixing. oo When a mic is connected to the MIC connector on the front of the unit, the tape playback level is lowered slightly. This is to ensure enough headroom when the tape playback and mic input sounds are combined. oo When playing a dubbed tape, the playback level will be lowered slightly if a mic is connected to the MIC connector on the front of the unit. When the mic is disconnected, the playback level will return to normal. oo When recording a mix of the tape playback sound and mic input, the REC LEVEL (recording level) knob cannot be used to adjust the volume after mixing. Mixing tape playback when recording You can mix in the sounds of TAPE 1 and input from a mic connected to this unit when recording to TAPE 2. This unit does not support stereo mics. Use a mono mic. Enjoying karaoke with tape playback Connect the mic plug to the MIC connector on the front of the unit. 1 Load a cassette tape for playback into the TAPE 1 compartment and a cassette tape for recording into the TAPE 2 compartment. 2 Press the TAPE 1 play (y) button to start tape playback. Then, turn the mic LEVEL knob to adjust the balance between the playback and mic sounds. 3 Press the TAPE 1 rewind (m) button and cue the song to play. 4 Press the TAPE 1 stop (8) button to stop the tape. 22 Connect the mic plug to the MIC connector on the front of the unit. 1 Load a cassette tape for playback into the TAPE 1 compartment. 2 Press the TAPE 1 play (y) button to start tape playback. Then, turn the mic LEVEL knob to adjust the balance between the playback and mic sounds. Sing along with the song. oo Use the PITCH CONTROL knob to adjust the pitch of the karaoke backing track as necessary. oo Karaoke can also be enjoyed with TAPE 2 playback, but controlling the pitch of the backing track is not possible when using TAPE 2. oo When a mic is connected to the MIC connector on the front of the unit, the tape playback level is lowered slightly. This is to ensure enough headroom when the tape playback and mic input sounds are combined while dubbing with mic mixing. oo The REC LEVEL (recording level) knob cannot be used to adjust the volume after mixing.