TEAC W-1200 Owners Manual English Francais Espanol - Page 30

Troubleshooting continued, Playback speed seems somewhat fast or slow.

Get TEAC W-1200 PDF manuals and user guides View all TEAC W-1200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Troubleshooting (continued) No or very little sound is output. ee Confirm connections with the amplifier. ee Confirm connections with the speakers and other devices. ee Confirm that operation of the connected device is correct. ee Confirm that speaker cable ¥ and ^ are not shorted. This unit uses a microprocessor, so noise and other external interference could cause it to stop functioning properly. If this occurs, unplug the power cord, wait for a while, and then turn the power back on to restart operations. There is noise. ee Place the unit as far away as possible from TVs, microwave ovens and other devices that have strong magnetism. Cassette compartment does not close. ee It will not close if the cassette tape is not properly loaded. Reinsert the cassette correctly. Sound quality is poor. ee Clean the heads (page 8). Playback speed seems somewhat fast or slow. ee Check the pitch control setting (page 17). Recording is not possible. ee If the erasure prevention tabs of the loaded cassette tape have been broken off, stick a piece of adhesive tape over the hole(s). ee Check the recording level setting (page 19). ee Confirm connections with the amplifier and the source device. ee Confirm that the amplifier selector is set correctly. Timer-controlled playback/recording does not start. ee For timer playback, set the TIMER switch to PLAY. ee For timer recording, set the TIMER switch to REC. ee Press the POWER button on this unit to turn it on. ee After setting timer playback/recording, turn the power off from the timer. (When the timer turns the power on, the W-1200 will operate.) 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
30
Troubleshooting (continued)
No or very little sound is output.
e
Confirm connections with the amplifier°
e
Confirm connections with the speakers and other devices°
e
Confirm that operation of the connected device is correct°
e
Confirm that speaker cable
¥
and
^
are not shorted°
There is noise.
e
Place the unit as far away as possible from TVs, microwave
ovens and other devices that have strong magnetism°
Cassette compartment does not close.
e
It will not close if the cassette tape is not properly loaded°
Reinsert the cassette correctly°
Sound quality is poor.
e
Clean the heads (page 8)°
Playback speed seems somewhat fast or slow.
e
Check the pitch control setting (page 17)°
Recording is not possible.
e
If the erasure prevention tabs of the loaded cassette tape
have been broken off, stick a piece of adhesive tape over the
hole(s)°
e
Check the recording level setting (page 19)°
e
Confirm connections with the amplifier and the source
device°
e
Confirm that the amplifier selector is set correctly°
Timer-controlled playback/recording does not start.
e
For timer playback, set the TIMER switch to PLAY°
e
For timer recording, set the TIMER switch to REC°
e
Press the POWER button on this unit to turn it on°
e
After setting timer playback/recording, turn the power off
from the timer° (When the timer turns the power on, the
W-1200 will operate°)
This unit uses a microprocessor, so noise and other external inter-
ference could cause it to stop functioning properly° If this occurs,
unplug the power cord, wait for a while, and then turn the power
back on to restart operations°