Home » TP-Link Manuals » Bridges & Routers » TP-Link TL-MR3420 » Manual Viewer

TP-Link TL-MR3420 User Guide - Page 34

G, TL-MR3420, Network - supported modems

UPC - 845973051495

Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

TL-MR3420 3G/3.75G Wireless N Router 4.5.2 3G Choose menu "Network→3G", you can configure parameters for 3G function on the screen below. To use the 3G function, you should first insert your USB modem on the USB port of the Router. There are already much 3G USB modem information embedded in the router. The USB modem parameters will be set automatically if the card is supported by the Router. Take E220 for example. If your USB modem inserted is supported by the Router, then your modem model will be shown in the 3G USB Modem field as shown in Figure 4-6. Otherwise, "Unknown Modem" will be shown instead as shown in Figure 4-7. Please visit our website http://www.tp-link.com to get the latest USB modems compatibility list. ) Note: 3G settings are unavailable when the Internet Access mode is set to WAN Only mode. Please change settings on Internet Access if you want to use 3G. -27-

Section	Page
Package Contents	8
Chapter 1. Introduction	9
1.1 Overview of the Router	9
1.2 Conventions	9
1.3 Main Features	10
1.4 Panel Layout	10
1.4.1 The Front Panel	10
1.4.2 The Rear Panel	11
Chapter 2. Connecting the Router	13
2.1 System Requirements	13
2.2 Installation Environment Requirements	13
2.3 Connecting the Router	13
Chapter 3. Quick Installation Guide	15
3.1 TCP/IP Configuration	15
3.2 Quick Installation Guide	17
Chapter 4. Configuring the Router	24
4.1 Login	24
4.2 Status	24
4.3 Quick Setup	26
4.4 QSS	26
4.5 Network	32
4.5.1 Internet Access	32
4.5.2 3G	34
4.5.3 WAN	40
4.5.4 MAC Clone	50
4.5.5 LAN	51
4.6 Wireless	52
4.6.1 Wireless Settings	52
4.6.2 Wireless Security	55
4.6.3 Wireless MAC Filtering	59
4.6.4 Wireless Advanced	61
4.6.5 Wireless Statistics	62
4.7 DHCP	63
4.7.1 DHCP Settings	63
4.7.2 DHCP Clients List	65
4.7.3 Address Reservation	65
4.8 Forwarding	67
4.8.1 Virtual Servers	67
4.8.2 Port Triggering	69
4.8.3 DMZ	71
4.8.4 UPnP	71
4.9 Security	72
4.9.1 Basic Security	73
4.9.2 Advanced Security	74
4.9.3 Local Management	76
4.9.4 Remote Management	77
4.10 Parental Control	78
4.11 Access Control	81
4.11.1 Rule	81
4.11.2 Host	84
4.11.3 Target	86
4.11.4 Schedule	88
4.12 Static Routing	89
4.13 Bandwidth Control	91
4.13.1 Control Settings	91
4.13.2 Rules List	92
4.14 IP & MAC Binding Setting	93
4.14.1 Binding Setting	93
4.14.2 ARP List	95
4.15 Dynamic DNS	95
4.15.1 Comexe.cn DDNS	96
4.15.2 Dyndns.org DDNS	97
4.15.3 No-ip.com DDNS	97
4.16 System Tools	98
4.16.1 Time Setting	99
4.16.2 Diagnostic	100
4.16.3 Firmware Upgrade	101
4.16.4 Factory Defaults	102
4.16.5 Backup & Restore	103
4.16.6 Reboot	104
4.16.7 Password	104
4.16.8 System Log	105
4.16.9 Statistics	107
Appendix A: FAQ	109
Appendix B: Configuring the PCs	114
Appendix C: Specifications	118
Appendix D: Glossary	119

Match case Limit results 1 per page

TL-MR3420

3G/3.75G Wireless N Router

-27-

4.5.2 3G

Choose menu “

Network

→

”, you can configure parameters for 3G function on the screen below.

To use the 3G function, you should first insert your USB modem on the USB port of the Router.

There are already much 3G USB modem information embedded in the router. The USB modem

parameters will be set automatically if the card is supported by the Router. Take E220 for example.

If your USB modem inserted is supported by the Router, then your modem model will be shown in

the 3G USB Modem field as shown in Figure 4-6. Otherwise, “Unknown Modem” will be shown

instead as shown in Figure 4-7. Please visit our website http://www.tp-link.com to get the latest

USB modems compatibility list.

)

Note

3G settings are unavailable when the Internet Access mode is set to WAN Only mode. Please

change settings on

Internet Access

if you want to use 3G.