Xerox 2006NPC DocuColor 2006 User Guide - Page 119

Windows 95/98 print drivers Windows 95/98 3. Network Setup Before you begin 1. Ensure that the DocuColor 2006 has been prepared for network printing. 2. Ensure that you have the printer name, Apple Talk Zone (if applicable), and IP Address. These may be obtained from your system administrator or from the Configuration Page. In order to print the Configuration Page, perform the following steps: a. Press the Offline button on the Printer Control Panel b. Press the Menu button until the message Print Pages from List is displayed on the Printer Control Panel. c. Press the Item/Enter button in order to select Print Configuration Page. d. Press the Item/Enter again button in order to print the page. Installing the print driver The following procedure provides the steps for installing the printer driver for parallel port printing. For detailed information about setting up IPX/SPX printing or SMB printing, refer to Installing the user software in a Windows 95/98 environment. 1. Insert the User Software CD in your CD-ROM drive. 2. Select the Start button, Settings, and Printers. 3. Double-click the Add Printer and select Next. 4. Select Local printer and Next. 5. Select the Have Disk button. 6. Perform one of the following: • If you are installing from the CD, select the CD-ROM drive (for example, D:\) from the drop-down box and select the Browse button. • If you are installing from files you downloaded using the Installer WebTool, type the name of your hard disk drive (for example, C:\) and select the Browse button. Xerox DocuColor 2006 3-5