Xerox 2006NPC DocuColor 2006 User Guide - Page 431

23. Tools Mode • Color Mode: This option allows you to change the default setting for the Original Type feature. The Original Type default can be programmed to one of the following: • Black Text • Black Text/Photo • Black Photograph • Color Text/Photo • Color Prnt Photo • Color Photograph • Auto Setting a default value for the Color Mode feature is useful when most originals are of the same type. • Output: This option allows you to change the default Output location for copies. The Output destination default can be set to the Exit Tray or the Top Tray. Media types other than Plain will automatically output to the Exit Tray, even if Top Trap is selected. Additional output selections are available if the Sorter/Stacker option is part of the configuration. Refer to Determining Output with the optional Sorter/Stacker in the Copy Features section for more information. All paper fed from the Bypass Tray automatically outputs to the Exit Tray, even if the Top Tray is set as the default. • Erase: The option allows you to change the default measurements for the Erase feature when it is on. Each Erase dimension can be set at a value between 0 and 50 mm. The new value is the default measurement for that dimension when the Erase feature is on. The default setting for the Erase option is Off. Changing the dimensional values does not set the default to On; it only changes the default dimensional values when the Erase feature is switched on. Xerox DocuColor 2006 23-5