Xerox 2006NPC DocuColor 2006 User Guide - Page 316

14. Printing from the Windows workstations Setting print options for all PostScript jobs (Windows NT 4.0) 1. Select Start, Settings, and Printers. 2. Right-click to select the Xerox DocuColor 2006 PCL printer icon and select Document Defaults. 3. Select the Fiery Printing tab. 4. Specify the appropriate default settings for all print jobs as described in the previous procedure. 5. Select OK. With the PCL printer driver, you can set options on a job-by-job basis or establish default settings for all jobs printed from your workstation to the DocuColor 2006. Setting print options for a PCL job (Windows NT 4.0) 1. Select Print in your application. 2. Select the Xerox DocuColor 2006 PCL printer icon and select Properties from the File menu. 3. Select the Fiery Printing tab. This tab serves as the control center for all frequently used printing functions. 4. Select the Paper Source print option bar. a. In the Page Size area, specify the paper size for the job. b. In the Paper Source area, select the paper tray for the job. c. In the Media Type area, select the type of media to use for the job. For more information on these and other print options, refer to the chapter Print options. If paper loaded in the selected tray is a different size, orientation, and/or media type than that of the job you are sending, the printer displays an error message and the job might not print. Load the correct paper in the selected tray or cancel the job. 14-18 Xerox DocuColor 2006