Xerox 2006NPC DocuColor 2006 User Guide - Page 343

18. Using Fiery WebSpooler About the Fiery WebSpooler window Fiery WebSpooler is a window to view printer functions and an interface from which you can control those functions. The Fiery WebSpooler window is divided into three areas by Spool, RIP, and Print status bars. When the printer receives jobs, the Fiery WebSpooler window becomes a dynamic display, filled with the names of jobs and their characteristics. The Spool, RIP, and Print areas of the Fiery WebSpooler window represent the stages of printing a job. Jobs come in at the top level (Spool) and drop down to the Print level, unless they are held along the way. Job icons Three types of icons are used for both active jobs and jobs on hold. Icon Active Jobs (white icons) Jobs on Hold (yellow icons) PostScript, PCL, or raster data headed for printing (top) or after printing (bottom). PostScript or PCL data headed for Print and Hold or job on Hold after printing (Hold). Printer icons Raster icon Job types PostScript, PCL, and raster data after printing, ready for fast reprint. PostScript or PCL data already rasterized and held. • Spooled jobs-Jobs listed in the area below the Spool status bar are PostScript files stored on the printer. These jobs were sent to either the Print queue (white icons) or the Hold queue (yellow icons). • RIPped jobs-Jobs listed in the area below the RIP status bar are ready to print. They have already been rasterized (RIPped, or processed for printing) and are waiting, in order, for access to the printer. Rasterized jobs can also be held; held jobs are shown with a yellow icon. • Printed jobs-Jobs listed in the area below the Print status bar have already been printed. Printed jobs can be stored on the printer. The number of jobs that can be stored (from 1 to 99) is defined in Setup. Xerox DocuColor 2006 18-3