Xerox 2006NPC DocuColor 2006 User Guide - Page 123

Windows NT 4.0 print drivers Windows NT 4.0 3. Network Setup Before you begin 1. Ensure the printer has been prepared for network printing. 2. Ensure you have the printer name, Apple Talk Zone (if applicable), and IP Address. These may be obtained from your system administrator or from the Configuration Page. In order to print the Configuration Page, perform the following steps: a. Press the Offline button on the Printer Control Panel b. Press the Menu button until the message Print Pages from List is displayed on the Printer Control Panel. c. Press the Item/Enter button in order to select Print Configuration Page. d. Press the Item/Enter again button in order to print the page. Installing the print drivers The following procedure provides the steps for installing the printer driver for parallel port printing. For detailed information about setting up IPX, TCP/IP, or SMB printing, refer to the Installing the user software in a Windows NT 4.0 environment chapter on the user CD. 1. Insert the User Software CD in your CD-ROM drive. 2. Select Start, Settings, and Printers. 3. Double-click Add Printer and select Next. 4. Select My Computer and Next. 5. Select LPT1 and Next. 6. Select Have Disk. 7. Perform one of the following: • If you are installing from the CD, type the name of the CD-ROM drive (for example, D:\) and select Browse. • If you are installing from files you downloaded using the Installer WebTool, type the name of your hard disk drive (for example, C:\) and select Browse. Xerox DocuColor 2006 3-9