Xerox 2006NPC DocuColor 2006 User Guide - Page 194
Setting up parallel port printing
UPC - 042215475440
View all Xerox 2006NPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
9. Installing user software in a Windows 95/98 environment Setting up parallel port printing 1. Ensure that the printer is configured for parallel port printing. For more information, refer to the chapters Connecting to the network and Performing the setup from the Printer Control Panel. 2. To spool files directly to the printer, set Port Timeout in Seconds to 10. To print directly to the DocuColor 2006, set Port Timeout in Seconds to 5. Setting this option to 10 seconds ensures that spooling is not interrupted due to timeout. 3. At the workstation, perform the following to change the BIOS settings: a. Restart the workstation and press the key indicated on the monitor as soon as the workstation starts up. You may have to scroll through several screens to reach the parallel port settings. b. Set Parallel Port Mode to ECP. c. Save the changed setting and exit. 4. Select the Start, Settings, and Printers. 5. Select the DocuColor 2006 printer icon and select Properties from the File menu. 6. Select the Details tab. In the Print to the following port drop down list, select LPT1: (ECP Printer Port). Check this selection carefully. It may read LPT1 (Printer Port), which is not equivalent to LPT1: (ECP Printer Port). If this box does not read LPT1: (ECP Printer Port), change the port setting now, as described in the section To prepare the port for parallel port printing and then return to this step. You may need your Windows 95/98 system CD. 9-12 Xerox DocuColor 2006