Xerox 2006NPC DocuColor 2006 User Guide - Page 170

8. Setting up the network server You do not have to rerun Setup when adding or removing a NetWare queue, but you should initialize these settings by powering the printer off and on after a queue is created or removed. When the DocuColor 2006 is configured to connect to a NetWare server, it polls the NetWare server for jobs in each of its queues. If jobs are found, they are transferred over the network to the matching connection. For example, jobs from the NetWare queue with the _print extension are sent to the Print queue. While a job is processed and printed, a record of the job is created. You can access the Job Log containing these records at any time. Configuring a NetWare 3.x, 4.x or 5.x server for printing Use this section when you set up a NetWare file server so that networked users can print to the DocuColor 2006 from their workstations and the printer can obtain jobs from the NetWare server. For each NetWare file server that you configure, follow these general steps: • Ensure that the server is connected to a functioning IPX network. • Log in as the Supervisor from a PC connected to the NetWare file server. • For NetWare 4.x and 5.x installations, set up an NDS connection. • For NetWare 4.x and 5.x in emulation mode, set the bindery context. • For NetWare 3.x and for NetWare 4.x and 5.x in bindery emulation, set up a file server, a print server, and a print queue for the DocuColor 2006. More detail is provided in subsequent sections and in your NetWare documentation. With bindery services, you can route all DocuColor 2006 print jobs through the same NetWare file server, or you can configure more than one file server to handle DocuColor 2006 jobs. The functions you perform on the Novell server, on the DocuColor 2006 and on the client workstation, are summarized in the following tables. Complete the operations on the server first, then at the DocuColor 2006, and finally at the client workstation. 8-4 Xerox DocuColor 2006