Xerox 2006NPC DocuColor 2006 User Guide - Page 159
Enable Novell - Yes/No
UPC - 042215475440
View all Xerox 2006NPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
7. Performing the setup from the Printer Control Panel The following options are displayed if Enable Auto IP is set to Yes: • Auto Gateway -Yes/No. Enables the system to automatically search for the Gateway address. • Enable AppleTalk -Yes/No. If Yes is selected, automatically reboots the system and enables AppleTalk. • ETH. IP Address (the default is 000.000.000.00). Use the arrow buttons to assign the printer an Ethernet IP address. Press Item/Enter to accept the selection. • ETH. Subnet Mask (the default is 000.000.000.00). Use this option to modify the subnet mask to one of the following values for printing with TCP/IP over Ethernet: • 255.000.000.000 if the IP address starts with a number less than 128 • 255.255.000.000 if the IP address is within the number range from 128 through 191 • 255.255.255.000 if the IP address starts with a number greater than 191 • Gateway address (the default is 000.000.000.00). If your network uses a gateway, type the address in the Gateway text boxes • Enable AppleTalk - Yes/No (the default is Yes). If Yes is selected, automatically reboots the system and enables AppleTalk. • Enable Novell - Yes/No. If Yes is selected, select the Ethernet frame type used for communication between your NetWare file server (or NetWare file servers if you connect to more than one) and the printer: • Auto Frame Type-Yes/No (the default is Yes). Select No to manually determine the frame type. • Ethernet 802.3-Yes/No (The default is No). Select Yes to enable Ethernet 802.3. • Ethernet 802.2-Yes/No (The default is No). Select Yes to enable Ethernet 802.2. • Ethernet II-Yes/No (The default is No). Select Yes to enable Ethernet II. • Ethernet SNAP-Yes/No (The default is No). Select Yes to enable Ethernet SNAP. Xerox DocuColor 2006 7-9