Xerox 2006NPC DocuColor 2006 User Guide - Page 153

7. Performing the setup from the Printer Control Panel System Setup Use this procedure for first-time setup if no password has been set. 1. Press the Offline button and press the Menu button until System Setup is displayed. 2. Press the Item/Enter button to display the following options. Enter information as required: • Printer Name. Enter a printer name of up to 16 characters using the numeric keypad. • Print Start Page - Yes/No. (No is the default.) Enter Yes if you want the printer to print a start page every time it restarts to verify that it is working properly. The Start page includes such information as printer name, enabled network protocols, amount of memory installed, and options installed on the printer. • Publish Printd Q - Yes/No. (Yes is the default.) Enter Yes to enable recently printed jobs to be stored on the printer. The Printed queue makes it convenient to reprint those jobs. • Jobs to Save (1-99). (10 is the default.) If PublishPrinted Q is set to Yes, specify the number of jobs to be stored in the Printed Queue. • Power Saver - 30 Min/60 Min/120 Min/180 Min. (30 Min is the default.) Specify the length of time before an inactive printer goes into Power Saver mode. Full power is restored when the printer receives a network print job or any button on the printer or copier control panel is pressed. The scanner has its own power saver setting that is independent of the printer. • Change Password - Yes/No (No is the default.) Use this option to change the administrator password for the printer. In most cases, only the system administrator should have access to this password. If you select Yes, you are prompted to enter the new printer password. The scanner has its own password that is independent of the printer. Xerox DocuColor 2006 7-3