Xerox 2006NPC DocuColor 2006 User Guide - Page 448
Transporting the Scanner
UPC - 042215475440
View all Xerox 2006NPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 448 highlights
23. Tools Mode Transporting the Scanner The scanner module must be locked when transporting the DocuColor 2006 to ensure against damage. Locking the module keeps it from sliding and either damaging itself or causing damage to other parts of the scanner. Use the following procedure to lock the scanner module: 1. Press the Tools button to display the Tools Main Menu on the Copier Screen. 2. Using the Arrow Buttons highlight the Admin Menu option. 3. Press the Select button. Password Input is displayed on the Copier Screen. 4. Using the Numeric Keypad, enter your Administrator Password. The numbers display as asterisks (*). If you make a mistake while entering a password, press the Clear (C) button. 5. Once the correct password is entered, the Administrator Menu is displayed on the Copier Screen. 6. Use the Arrow Buttons to highlight the Transporting Scanner option. 7. Press the select button. Transporting Scanner selection is displayed on the Copier Screen. 8. Use the Arrow Buttons to select ON. The default setting for transporting the scanner is OFF. If you do not wish to transport the scanner at this time, press the Exit button to return to the Administrator Menu. The Tools Main Menu is displayed on the Copier Screen. To exit Tools Mode, press the Tools button. 9. The copier/printer locks the scanner module. The copier then prompts you to turn off the power. 10. Turn the power off and proceed with moving the scanner. For directions on turning the power off, go to the Setting up the DocuColor 2006 chapter. Once the scanner module is locked, you cannot return to any copy functions until the scanner power is switched off and then on again. This is the only way to unlock the scanner module. 23-22 Xerox DocuColor 2006