Xerox 8560DN User Guide - Page 44
Tray 1 Mode, Automatic, Dynamic, Static - specifications
UPC - 095205733280
View all Xerox 8560DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
4. Adjust the paper guides to fit the paper loaded in the tray. Loading Paper 8560p-126 5. To use the current tray setup, press the OK button on the control panel. If you load a new paper size and type in the tray, do the following: a. Select Change setup, and then press the OK button. b. Select the paper size, and then press the OK button. c. Select the paper type, and then press the OK button. See also: Supported Paper Sizes and Weights for Tray 1 on page 3-6 Printing on Specialty Media on page 3-29 Printing Custom Size Paper from Tray 1 on page 3-56 Tray 1 Mode Tray 1 Mode defines the printer's media handling behavior to better fit the kind of printing you want to do. Three modes determine how paper size and type are set for Tray 1, and which tray is used if you do not select a specific tray: Automatic: The automatic setting enables incoming print jobs to set paper size and type. It prints from Tray 1 if paper is present at the start of a job and when the job has not selected another tray. Dynamic (Default): The dynamic setting prompts the printer to search the trays to find the paper size and type to match your print job. If no size or type matches are found in Tray 2, 3, or 4, and Tray 1 media size and type have not been set on the printer's control panel, the printer sets the paper size and type from the print job, and then prints from Tray 1. Static: The static setting enables the user to select the paper size and type settings for the trays using the Paper Tray Setup menu option on the printer's control panel. To print from Tray 1, the paper size and type of your print job must match the Tray 1 paper size and type settings on the control panel. See also: Advanced Features Guide at www.xerox.com/office/8560Psupport Phaser® 8560 Color Printer 3-14