Xerox 8560MFP System Administrator Guide - Page 57
Fax Receive Setup, Sided Fax Printing
UPC - 095205428841
View all Xerox 8560MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Fax Defaults Dial Pause: This setting determines the duration of each pause when dialing to send a fax. Select the Dial Pause number of seconds from the drop-down list. The default setting is 3 Seconds or 2 Seconds for South Africa and Region 5. Dial Delay: This setting determines the delay after hearing the dial tone before dialing to send a fax. Select the Dial Delay number of seconds from the drop-down list. The default setting is 0 Seconds. Fax Receive Setup Paper Supply: This setting determines which tray the system takes paper from to print fax jobs. If no value is selected for Paper Supply, this field defaults to Tray 2. ■ Auto Select: The system determines which tray to use depending on the fax job. ■ Tray 1: The system takes paper from Tray 1. ■ Tray 2: The system takes paper from Tray 2. ■ Tray 3: The system takes paper from Tray 3*. ■ Tray 4: The system takes paper from Tray 4*. * Available only if optional tray is installed. Fax Receive: This setting turns Off or On answering incoming telephone calls and scanning them for fax information. The default setting is On. Answer Delay: This setting specifies the number of rings that occur before the system answers incoming telephone calls. The default setting is 1 Ring, except for Australia and Region 1, whose default setting is 2 Rings. Secure Receive: This setting turns On or Off requiring a numeric password to print received faxes. The default setting is Off. Secure Receive Password: Enter the 4-digit password that is required to print received faxes in this field. If a password is already defined, this field displays ****. Junk Fax Prevention: This setting turns On or Off only printing faxes that are received from telephone numbers in the individual speed dial directory. The default setting is Off. 2-Sided Fax Printing: This setting specifies 2-sided fax printing options. The default setting is 1-1. The following values are supported: ■ 1-1: Print faxes single-sided (on one side of a sheet of paper). ■ 1-2: Print faxes double-sided (on both sides of a sheet of paper). System Administrator Guide 6-4