Xerox 8560MFP System Administrator Guide - Page 86
Phaser PJL Commands, System Administrator Guide, HP Printer Job Language Technical Reference
UPC - 095205428841
View all Xerox 8560MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Phaser PJL Commands PJL Command Values Description @PJL SET/DEFAULT XPCLTRAYSWITCH=value @PJL DEFAULT XPCLPAPERSRCx = y @PJL SET/DEFAULT XSLIPSHEET @PJL SET XSLIPSHEETSOURCE ON, OFF x is 0, 1, 2, 3, 4, 5, 6, 7, 8, 20, 21, 22, 23, which is the number in the &l#H tray selection commands. y is -1 for AutoSelect, 0 for the current tray (eject page), 1 for Tray 1, 2 for Tray 2, etc., and 99 for the factory defaults. OFF, JOB, SET, PAGE TRAYX Switches trays when a tray goes empty. If AutoSelect is chosen as the paper source (tray) in PCL, then tray switching is always active, regardless of the value. When the current tray goes empty, the printer attempts to switch to another tray containing the same size and type of paper. This command only takes effect when a specific tray, such as Tray 2, is selected in the job. When this command is ON, tray switching still occurs when the tray goes empty. When this command is OFF, no switching occurs and the user is prompted to load paper. Overrides the tray selected in the &l#H PCL tray selection commands. Inserts a slip sheet between the selected option. Selects the slip sheet from the specified tray. * See the HP Printer Job Language Technical Reference for the values. System Administrator Guide B-7