Yamaha RX-V2500 Owner's Manual - Page 20
FRONT terminals, CENTER terminals, SUBWOOFER jack, PRESENCE terminals, Bi-wired connection
View all Yamaha RX-V2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
SPEAKER SETUP ■ FRONT terminals Connect one or two speaker systems to these terminals. If you use only one speaker system, connect it to either of the FRONT A or B terminals. Note The Canada model cannot output to two separate speaker systems simultaneously. Bi-wired connection The unit also allows you to make bi-wired connections to one speaker system. Use two pairs of speaker cables for each speaker (one pair for the woofer and one pair for the tweeter/mid-range). To use the bi-wired connections, press SPEAKERS A and SPEAKERS B on the front panel so that both SP A and B light up on the front panel display. Bi-wired connection ■ CENTER terminals Connect a center speaker to these terminals. ■ SURROUND terminals Connect surround speakers to these terminals. ■ SUBWOOFER jack Connect a subwoofer with a built-in amplifier, such as the YAMAHA Active Servo Processing Subwoofer System, to this jack. ■ SURROUND BACK terminals Connect surround back speakers to these terminals. If you only connect one surround back speaker, connect it to the left (L) terminals. ■ PRESENCE terminals Connect presence speakers to these terminals. Note (U.S.A., Canada, U.K., Europe and Australia models only) You can also use these terminals to connect Zone 2 speakers (see page 63). R+ -A - +L FRONT + -B - + This unit 16