Yamaha RX-V2500 Owner's Manual - Page 84
Turning this unit to either on or standby, Special considerations for DTS software
View all Yamaha RX-V2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
ZONE 2/ZONE 3 (U.S.A., CANADA, U.K., EUROPE AND AUSTRALIA MODELS ONLY) 3 Press an input selector button to select the input source you want to listen to in the second/third room. The display window shows "2: name of selected input" or "3: name of selected input" if the remote control is in the Zone 2/Zone 3 mode. A B INPUT MODE SLEEP PHONO TUNER CD MULTI CH IN V-AUX CBL/SAT MD/TAPE CD-R DTV VCR 1 DVR/VCR2 DVD Note Signals input to V-AUX and PHONO jacks cannot be sent to Zone 2/Zone 3. 4 You can control the unit from Zone 2 or Zone 3 by using the input selector, STANDBY, SYSTEM POWER, MUTE and VOLUME +/- buttons. ■ Turning this unit to either on or standby SYSTEM POWER and STANDBY work differently depending on the selected mode that appears on the display window. • When normal, Zone 2 or Zone 3 mode is selected, you can turn the main unit, Zone 2 or Zone 3 to on/standby individually. • When System mode is selected, or when "2000" or "2002" (see page 68) is selected as the amplifier library (L:AMP) code, you can turn the main unit, Zone 2 and Zone 3 to on/standby simultaneously. LCD display SYSTEM POWER/ STANDBY Normal mode* Name of component Turns the main unit on/standby Zone 2 mode "Zone2" or "2:name of component" Turns Zone 2 to on/ standby Zone 3 mode "Zone3" or "3:name of component" Turns Zone 3 to on/ standby System mode "SYSTM" Turns everything (the main unit, Zone 2, Zone 3) on/standby * "MAIN" appears for a few seconds when SYSTEM POWER or STANDBY is pressed. POWER TV POWER AV STANDBY SYSTEM POWER A B INPUT MODE SLEEP PHONO TUNER CD MULTI CH IN V-AUX CBL/SAT MD/TAPE CD-R DTV VCR 1 DVR/VCR2 DVD SELECT ++ TV VOL CH -- AMP + VOL SOURCE - TV * A/B/C/D/E TV MUTE TV INPUT MUTE TOP TITLE EXIT MENU PURE DIRECT * VOLUME +/- can be used only when Zone2 Volume or Zone3 Volume is set to "Variable" in the GUI menu (see page 63). 5 Press SELECT k/n to exit from the Zone 2/ Zone 3 mode. ■ Special considerations for DTS software The DTS signal is a digital bitstream. If you attempt to send the DTS signal to the second/third room you will only hear digital noise (that may damage your speakers). Thus, the following considerations and adjustments need to be made when playing DTS encoded discs. For DVDs encoded with DTS Only 2 channel analog audio signals may be sent to the second/third room. Use the disc menu to set the DVD player's mixed 2channel left and right audio outputs to the PCM or Dolby Digital soundtrack. Notes • The source in Zone 2 and the source available for recording are always the same. • "ZONE2" or "ZONE3" will appear in the display window only when k is pressed, and "SYSTM" only when n is pressed For CDs encoded in DTS To avoid unexpected noise, DO NOT USE the Zone 2/ Zone 3 feature with CDs encoded in DTS. 80