Yamaha RX-V2500 Owner's Manual - Page 34
Troubleshooting for the auto setup procedure, Before auto setup, During auto setup
View all Yamaha RX-V2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
AUTO SETUP ■ Troubleshooting for the auto setup procedure Before auto setup Error message Connect MIC! Cause Optimizer microphone is not connected. Unplug Phones! No Setup Menu! Memory Guard! Headphones are connected. No setup menu items have been selected. This setting is protected. Remedy • Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel. • Unplug the headphones. • Select at least one setup menu item. • Remove the protection setting for auto setup (see page 64). During auto setup Press l / h to display detailed information for individual errors. Select Retry to try the auto setup procedure again. Error message Cause Remedy E01:No Front SP E02:No Surr. SP E03:No Pres. SP E04:SBR ->SBL E05:Noisy E06:Check Surr. E07:No MIC E08:No Signal E09:User Cancel E10:Internal Err Front L/R channel signal(s) is (are) not detected. Only one surround channel signal is detected. Only one presence channel signal is detected. Only the surround back right channel signal is detected. Background noise is too loud. Surround back speaker(s) is (are) connected, though surround L/R speakers are not. The optimizer microphone was unplugged during the auto setup procedure. The optimizer microphone does not detect test tones. The auto setup procedure was cancelled because a setting that affects auto setup was changed during the procedure. An internal error occurred. • Select the front speakers with SPEAKERS A or B. • Check the front L/R speaker connections. • Check the surround speaker connections. • Check the presence speaker connections. • Connect the surround back speaker to the LEFT SURROUND BACK SPEAKERS terminal if you only have one surround back speaker. • Try auto setup in a quiet environment. • Turn off noisy electric equipment like air conditioners, or move them away from this unit. • Connect surround speakers when using (a) surround back speaker(s). • Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel. • Check the microphone setting. • Check the speaker connections and placement. • Perform the auto setup procedure again. • Restart this unit, then try the auto setup procedure again. 30