Yamaha RX-V2500 Owner's Manual - Page 83
Remote controlling Zone 2/Zone 3, To enable Zone mode on the remote, control
View all Yamaha RX-V2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
ZONE 2/ZONE 3 (U.S.A., CANADA, U.K., EUROPE AND AUSTRALIA MODELS ONLY) Using this unit's internal amplifier To use this unit's internal amplifier, select "Internal" in Zone2 Amplifier 2 (page 63). R L + - PRESENCE/ ZONE 2 Second room This unit Remote controlling Zone 2/Zone 3 The supplied remote control can be used to control Zone 2/Zone 3. You can even select the input source and control components located in the main room directly from the second/third room regardless of the listening condition in the main room. ■ To enable Zone mode on the remote control You will be able to switch the remote control mode from one room to another, and use the input selector, STANDBY, SYSTEM POWER, MUTE and VOLUME +/- to control the selected room. 1 Set REC OUT/ZONE 2 on the front panel to SOURCE/REMOTE. SOURCE/ REMOTE DVD MD/TAPE DTV CD-R CBL/SAT TUNER VCR 1 CD DVR/ VCR2 REC OUT/ZONE 2 6 Press ENTER to set the number. "OK" appears in the display window if setting was successful. 7 Press LEARN to complete the Zone setup. The remote control will be able to operate this unit from Zone 2 or Zone 3. LEARN ■ To control Zone 2/Zone 3 1 Press SELECT k repeatedly to display "ZONE 2" or "ZONE 3" in the display window. SELECT 2 Repeat steps 1 through 3 of the procedure in "Setting remote control codes" on page 67. 3 Press l / h to select "L:AMP". or 2 Press SYSTEM POWER to turn Zone 2 or Zone 3 power on. ENTER 4 Press ENTER. "2000" appears in the display window. 5 Enter the code number "2001" or "2003". For details, see page 68. ADVANCED OPERATION 79