Yamaha RX-V2500 Owner's Manual - Page 82
ZONE 2/ZONE 3 (U.S.A., CANADA, U.K., EUROPE AND AUSTRALIA MODELS ONLY), Zone 2/Zone 3 connections
View all Yamaha RX-V2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
ZONE 2/ZONE 3 (U.S.A., CANADA, U.K., EUROPE AND AUSTRALIA MODELS ONLY) ZONE 2/ZONE 3 (U.S.A., CANADA, U.K., EUROPE AND AUSTRALIA MODELS ONLY) This unit allows you to configure a multi-room audio system. The Zone 2 and Zone 3 features enable you to set this unit to reproduce separate input sources in the main room, second room (Zone 2) and third room (Zone 3). You can control this unit from the second or third room using the supplied remote control. Only analog signals are sent to the second and third rooms. Any source you want to listen to in the second or third room must be connected using the analog (AUDIO L/R) input jacks on this unit. Zone 2/Zone 3 connections You need the following additional equipment to use the multi-room functions of this unit: • An infrared signal receiver in the second and/or third room. • An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in the second and/or third room to the main room (to a CD player or DVD player, for example). • An amplifier and speakers for the second and/or third room. • A video monitor for the second room. y • Since there are many possible ways to connect and use this unit OUT IN OUT IN CONTROL OUT in a multi-room configuration, we recommend that you consult This unit with your nearest authorized YAMAHA dealer or service center for the Zone 2/Zone 3 connections that best meet your requirements. • Some YAMAHA models are able to connect directly to the CONTROL OUT jack on this unit. If you own these products, you may not need to use an infrared emitter. Up to six YAMAHA components can be connected as shown. ■ System configuration and connections example Using external amplifiers To use an external amplifier in Zone 2, select "External" in Zone2 Amplifier (page 63). ZONE 3 AUDIO OUT ZONE 2 VIDEO OUT ZONE 2 AUDIO OUT SP OUT MONITOR OUT DVD player This unit (or other component) MAIN SYSTEM ZONE 2 VIDEO IN ZONE 3 AUDIO IN Infrared emitter Amplifier Remote control Infrared signal receiver Amplifier Remote control Infrared signal receiver Main room Second room Third room REMOTE OUT REMOTE 1 IN REMOTE 2 IN Notes • When not using the main room, turn down the volume of this unit in the main room. Adjust the Zone 2/Zone 3 volume by using the amplifier in the second/third room. • To avoid unexpected noise, DO NOT USE the Zone 2/Zone 3 feature with CDs encoded in DTS. 78