Yamaha RX-V2500 Owner's Manual - Page 72
Press ENTER., different type of component.
View all Yamaha RX-V2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
REMOTE CONTROL FEATURES 3 Press and hold LEARN for about 3 seconds using a ballpoint pen or similar object. The library name (ex. "L:DVD") and the selected component name (ex. "DVD") appear alternately in the display window. LEARN y If you want to setup for another component, press the input selector button or SELECT k/n to select the component. Notes • Be sure to press and hold LEARN for at least 3 seconds, otherwise the learning process will start. • If you do not complete each of the following steps within 30 seconds, the setting mode will be automatically canceled. In this case, press LEARN again. If you want to change a library (component category), press l / h. You can set a different type of component. Library choices: L:DVD, L:DVR, L:LD, L:CD, L:CDR, L:MD, L:TAP (tape), L:TUN (tuner), L:AMP*, L:TV, L:CAB (cable), L:SAT (satellite), L:VCR * The amplifier library (L:AMP) code is preset to "2000" in order to operate this unit. However, you can switch by entering one of the following 4 codes if necessary. AMP library code (remote control setting) Function Remote control ID (this unit's setting: see page 81) 2000 To operate this unit using the (initial setting) default code. 2001 To operate this unit using the default code. To operate Zone 2 or Zone 3 features (see page 78). (U.S.A., Canada, U.K., Europe and Australia models only) ID1 (initial setting) 2002 To operate this unit using an alternative code. To operate this unit using an alternative code. ID2 2003 To operate Zone 2 or Zone 3 features of other YAMAHA receivers/amplifiers (see page 78). When using multiple YAMAHA receivers/amplifiers, you may be able to operate the other components simultaneously with the default code setting. In this case, set one of the alternative codes to operate this unit separately. 4 Press ENTER. The four-digit code set for the selected component appears in the display window. Note "0000" appears in the display window if no code has been set. 5 Press the numeric buttons to enter the four- digit remote control code for the component you want to use. For a complete list of available remote control codes, refer to "LIST OF REMOTE CONTROL CODES" at the end of this manual. STEREO 1 MUSIC 2 ENTERTAIN 3 MOVIE 4 THX 5 STANDARD SELECT EXTD. SUR 6 7 8 1 MEMORY 2 9 0 A SPEAKERS B +10 ENT. 68