ZyXEL P-2612HNU-F3 User Guide - Page 107
Table 10, Table 9
View all ZyXEL P-2612HNU-F3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Chapter 5 Broadband Table 9 Broadband Add/Edit: Bridge (ADSL) (continued) Label DESCRIPTION Maximum Burst Size Maximum Burst Size (MBS) refers to the maximum number of cells that can be sent at the peak rate. Type the MBS, which is less than 65535. Apply Back This field is available only when you select Non Realtime VBR or Realtime VBR. Click Apply to save your changes. Click Back to return to the previous screen. If you select EtherWAN as the interface type, the following screen appears. Figure 19 Broadband Add/Edit: Bridge (Ethernet) The following table describes the fields in this screen. Table 10 Label General Name Type Mode VLAN Broadband Add/Edit: Bridge (Ethernet) DESCRIPTION Enter a service name of the connection. Select EtherWAN as the interface for which you want to configure The ZyXEL Device transmits data over the Ethernet WAN port. Select this if you have a DSL router or modem in your network already. Select Bridge when your ISP provides you more than one IP address and you want the connected computers to get individual IP address from ISP's DHCP server directly. If you select Bridge, you cannot use routing functions, such as QoS, Firewall, DHCP server and NAT on traffic from the selected LAN port(s). This section is available only when you select EtherWAN in the Type field. P-2612HNU(L)-FxF User's Guide 107