ZyXEL P-2612HNU-F3 User Guide - Page 108
The 3G Backup Screen
View all ZyXEL P-2612HNU-F3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Chapter 5 Broadband Table 10 Broadband Add/Edit: Bridge (Ethernet) (continued) Label DESCRIPTION Enable VLAN Select this to add the VLAN Tag (specified below) to the outgoing traffic through this connection. Enter 802.1P Priority IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC-layer frame that contains bits to define class of service. Enter 802.1Q VLAN ID Bridge Group Type the IEEE 802.1p priority level (from 0 to 7) to add to traffic through this connection. The greater the number, the higher the priority level. Type the VLAN ID number (from 1 to 4094) for traffic through this connection. Select the LAN/WLAN port(s) from which traffic will be forwarded to the WAN interface directly. Select a port from the Available LAN/WLAN Port(s) list and click Add >> to add it to the Bridged LAN/WLAN Port(s) list. If you want to remove a port from the Bridged LAN/WLAN Port(s) list, select it and click Remove