2012 Nissan Quest Owner's Manual - Page 151

cable at the rail, the door could operate automatically. PRECAUTIONS ON POWER SLIDING DOOR OPERATION GUID-1DBA582B-9B7E-4AD0-A68B-762BDAC084D5 . Do not perform the power sliding door operation frequently when the engine is stopped. This could cause a discharged battery. Do not start the engine while the sliding door is in an power operation. The door may not operate properly. Make sure that the sliding doors are closed before starting the vehicle. Under the following cases, turn the power door main switch off: - When the sliding door is malfunctioning. - When operating the sliding door manually. - When you need to keep the sliding door open for a period of time. - When washing the vehicle or performing any maintenance work. . . . SPA2071 SPA2547 Power door main switch . 1 of Be careful not to damage the sensor * the sliding door. When reconnecting the battery cable with the sliding door open (in case of a discharged battery, etc.), be sure to fully close the sliding door manually once before performing the power operation. Otherwise, the power open or close function may not operate properly. SWITCHING SLIDING DOOR OPERATION GUID-5E25AD8C-1056-4BE2-BD55-2EB289AF2E2F Using the power door main switch located on the instrument panel, you can switch the sliding door between power and manual operation. To turn on the power operating mode, push the switch to the ON position. To turn off the power operation, push the switch to the OFF position, and then the sliding door can be manually operated. When the power door main switch is pushed to the "OFF" position, the power operation is not available by the sliding door switch on the pillar, sliding door one-touch switch and power assist. 3-10 Pre-driving checks and adjustments