2012 Nissan Quest Owner's Manual - Page 216
2012 Nissan Quest Manual
Page 216 highlights
Heating and defogging: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 This mode heats the interior and defogs the windows. 1. Push the air flow control button to change to the mode. 2. Push the fan speed control set the desired fan speed. buttons to 2. Push the air flow control button to change to the mode. 3. Push the fan speed control buttons to set the desired fan speed. 4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Push the temperature control buttons to set the desired temperature between the middle and the cool position. . For quick cooling when the outside temperature is high, push the air recirculation button to switch to the air recirculation mode. (The indicator light turns on.) Be sure to turn off the air recirculation mode for normal cooling. A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. 3. Push the fan speed control buttons to the desired fan speed. 4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Push the temperature control buttons to set the desired temperature between the middle and the hot position. Dehumidified or defrosting/defogging: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 This mode is used to defog the windows and dehumidify the air. 1. Push the front defroster button indicator light turns on.) on. (The 3. Push the temperature control buttons to set the desired temperature. When the mode is selected, the air conditioner will automatically turn on. This will dehumidify the air and help to defog the windows. The A/C indicator light will illuminate when the air conditioner automatically turns on. The air conditioner and A/C indicator light will remain on in all flow control modes until the A/C button is pressed. 2. Push the fan speed control buttons to set the desired fan speed. 3. Push the temperature control buttons to set the desired temperature. When the mode is selected, the air conditioner will automatically turn on. This will dehumidify the air and help to defog the windows. The A/C indicator light will illuminate when the air conditioner automatically turns on. The air conditioner and A/C indicator light will remain on in all flow control modes until the A/C button is pushed. To remove frost from the outside surface of the windshield quickly, set the temperature to the maximum hot position and the fan speed to maximum position. . Air conditioner operation GUID-803CA434-5D0E-4D2D-BEE1-1F3BD1B898F7 The air conditioner system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the air conditioner system due to the lack of lubrication. Cooling: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 This mode is used to cool and dehumidify the air. " button 1. Push the outside air circulation " to switch to the outside air circulation mode. (The indicator light turns on.) Dehumidified heating: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 This mode is used to heat and dehumidify the air. 1. Push the outside air circulation " " button to switch to the outside air circulation mode. (The indicator light turns on.) 2. Push the air flow control button to change to the position. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-35