2012 Nissan Quest Owner's Manual - Page 380

4. When the spare tire is completely lowered, carefully slide it from under the vehicle. 5. Remove the suspending plate spare tire. E * from the 6. After removing the spare tire, raise the spare tire cable completely by turning the spare tire lowering mechanism clockwise using the D . tool * 7. Before moving or jacking up the vehicle, check under the vehicle to make sure the cable is stored properly. JVE0032X WARNING . Never jack up the vehicle before removing the spare tire from under the vehicle. This may lead to an accident could result in serious personal injury. Do not move the vehicle with the spare tire cable lowered. The cable could hit or become tangled with an object on the road. Serious vehicle damage could occur and may lead to an accident and could result in serious personal injury. SCE0630 Getting the spare tire GUID-1FB755FE-1FC8-43E1-AE9C-801B417FB7E4 The spare tire is located under the center of the vehicle. 1. Lift up the floor carpeting flap behind the front center console, then remove insulation piece to access the spare tire lowering C . mechanism * 2. Loosen the spare tire lowering mechanism C with the wheel nut wrench. * D , turn 3. Using the assembled socket tool * C the spare tire lowering mechanism * counterclockwise as illustrated to lower the spare tire. Removing wheel cover (if so equipped) GUID-B6BFF967-EFDB-4567-8417-F7BC9FA8200E WARNING Never use your hands to remove the wheel cover. This may cause personal injury. To remove the wheel cover, use the jack rod as illustrated. 1 * . 2 between the wheel and jack rod Apply cloth * to prevent damaging the wheel and wheel cover. In case of emergency 6-5