2012 Nissan Quest Owner's Manual - Page 169

Power open GUID-E520941D-2FFA-475E-A192-DF411DDFD2D0 When the lift gate is fully closed, the lift gate will fully open automatically by: A on pushing the power lift gate switch * the instrument panel for more than 1 second B . pushing the lift gate opener switch * C on . pushing the power lift gate button * the Intelligent Key for more than 1 second The hazard flashes 4 times and the outside chime sounds when the lift gate starts opening. Reverse function GUID-F21D810B-0D64-4693-9BD3-ECC224DEB669 The power lift gate will reverse immediately if one of the following actions is performed during power open or power close. A on pushing the power lift gate switch * the instrument panel D on the lower . pushing the lift gate switch * part of the lift gate C on . pushing the lift gate button * the Intelligent Key. The outside chime sounds when the lift gate starts to reverse. NOTE: If the pinch sensor is damaged or removed, the power close function will not operate. . . WARNING There is a small distance immediately before the closed position that cannot be detected. Make sure that all passengers keep their hands, etc., clear from the lift gate opening before closing the lift gate. NOTE: The lift gate can be opened by the power A lift gate switch * or the lift gate button C even if the lift gate is locked or * the power door main switch is in the OFF position. The lift gate will unlock and open. Auto reverseGUID-EA666371-C5BC-46BB-87EE-855747261984 function The auto-reverse function enables the lift gate to automatically reverse when something is caught in the lift gate as it is opening or closing. When the control unit detects an obstacle, the lift gate will reverse and return to the full open or full close position. If a second obstacle is detected, the lift gate motion will stop and the drive motor will disengage. The lift gate will enter the manual mode. A pinch sensor is mounted on each side of the lift gate. If an object is detected by the pinch sensor during power close, the lift gate will reverse and return to the full open position immediately. Manual mode GUID-FB81CA50-B914-43D8-8C60-3691116C5C60 If power operation is not available, the lift gate can be operated manually. Power operation may not be available if multiple obstacles have been detected in a single power cycle or if the battery voltage is low. When the power door main switch is in the OFF position, the lift gate can be opened manually by pushing the lift gate opener switch. If the power lift gate opener switch is pushed during power open or close, the power operation will be canceled and the lift gate can be operated manually. Power close GUID-F581054C-64D4-4DCE-902F-9479C5B32588 When the lift gate is fully opened, the lift gate will fully close automatically by: A on pushing the power lift gate switch * the instrument panel for more than 1 second D on . pushing the power lift gate switch * the lower part of the lift gate C . pushing the lift gate button * on the Intelligent Key for more than 1 second The hazard flashes 4 times and the outside chime sounds when the lift gate starts closing. . 3-28 Pre-driving checks and adjustments