2012 Nissan Quest Owner's Manual - Page 220

Automatic operation (AUTO) GUID-D3349AE0-1D21-4681-9BC9-F5E415C17B3A The AUTO mode may be used year-round as the system automatically controls constant temperature, air flow distribution and fan speed after the desired temperature is set manually. To turn the heater and air conditioner on or off, push the "ON·OFF" button. Cooling and dehumidified heating: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 1. Push the "AUTO" button. (The AUTO indicator light will illuminate.) 2. If the A/C indicator light does not illuminate, push the "A/C" button. (The A/C indicator light will illuminate.) 3. Push the temperature control buttons (" " and " ") (driver's side) to set the desired temperature. . The temperature can be set within the range of 60 to 908F (18 to 328C). . When "DUAL" does not appear on the display: - Pushing the "AUTO" button changes both the driver's and front passenger's side temperature. - Pushing the "DUAL" button allows the user to independently change the front passenger's side temperature with the passenger side temperature control but- tons (" " and " "). ("DUAL" will appear on the display.) To cancel the separate temperature setting, push the "DUAL" button ("DUAL" will disappear from the display) and the driver's side temperature setting will be applied to both the driver's and front passenger's sides. 4. Models with Advanced Climate Control System (ACCS): . Push the " AUTO" auto-recirculation button. The indicator light on the " AUTO" auto-recirculation button will illuminate. In this mode, the sensor detects odors and gas to automatically switch between the air recirculation mode and the outside air circulation mode. (See "Advanced climate control system" (P.442) for details.) Models without Advanced Climate Control System (ACCS): . Push and hold the air recirculation " " button or outside air circulation " " button (the one with the indicator light on) for more than 2 seconds to set the automatic control between the air recirculation and outside air circulation modes. (The " " and " " indicator lights will blink twice.) The following conditions need to be met for the automatic air intake control mode to function properly. . The air flow control is not in the front defroster mode (the indicator light on the front defroster " FRONT" button is turned off). . The outside temperature is approximately 328F (08C) or above. A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. Heating (A/C off): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 1. Push the "AUTO" button. (The AUTO indicator light will illuminate.) 2. If the A/C indicator light illuminates, push the "A/C" button. (The A/C indicator light will turn off.) 3. Push the temperature control buttons (" " and " ") (driver's side) to set the desired temperature. When the DUAL mode is turned off ("DUAL" does not appear on the display): . Pushing the "AUTO" button changes both the driver's and front passenger's side temperature. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-39