2012 Nissan Quest Owner's Manual - Page 172

. Never pour fuel into the throttle body to attempt to start your vehicle. Close the sliding door before opening the fuel-filler door. Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. To reduce the risk of serious injury or death when filling portable fuel containers: - Always place the container on the ground when filling. - Do not use electronic devices when filling. - Keep the pump nozzle in contact with the container while you are filling it. - Use only approved portable fuel containers for flammable liquid. paint damage. . Insert the cap straight into the fuelfiller tube, then tighten until the fuel-filler cap clicks. Failure to tighten the fuel-filler cap properly may cause the malfunction indicator light (MIL) to illuminate. If the light illuminates because the fuelfiller cap is loose or missing, tighten or install the cap and continue to drive the vehicle. The light should turn off after a few driving trips. If the light does not turn off after a few driving trips, have the vehicle inspected by a NISSAN dealer. For additional information, see "Malfunction Indicator Light (MIL)" (P.2-17). . The LOOSE FUEL CAP warning will appear if the fuel-filler cap is not properly tightened. It may take a few driving trips for the message to be displayed. Failure to tighten the fuel-filler cap properly after the LOOSE FUEL CAP warning appears may cause the Malfunction Indicator Light (MIL) to illuminate. . . JVP0067X To remove the fuel-filler cap: 1. Turn the fuel-filler cap counterclockwise to remove. 2. Hang the tether of the cap on the hook while refueling. To install the fuel-filler cap: 1. Insert the fuel-filler cap straight into the fuelfiller tube. 2. Turn the fuel-filler cap clockwise single click is heard. 2 * 1 * 3 * until a CAUTION . If fuel is spilled on the vehicle body, flush it away with water to avoid Pre-driving checks and adjustments 3-31