2012 Subaru Legacy Owner's Manual - Page 140

1-18 Seat, seatbelt and SRS airbags 2. Pull out the seatbelt slowly from the retractor. Rear center seatbelt is stowed in the recess of the ceiling. 1. Retrieve the connector (tongue) plate from the slot in the recess by pulling the connector (tongue) plate. 3. After confirming that the webbing is not twisted, insert the connector (tongue) attached at the webbing end into the buckle on the right-hand side until a click is heard. If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly. If the belt still cannot be unlocked, let the belt retract slightly after giving it a strong pull, then pull it out slowly again. 4. After fastening the seatbelt, make sure that the " " mark on the connector (tongue) and the " " mark on the buckle face outwards. 5. Insert the center seatbelt tongue plate into the center seatbelt buckle marked