2012 Subaru Legacy Owner's Manual - Page 450

9-8 In case of emergency 10. Remove the wheel nuts and the flat tire. wheel nuts. Tighten them by hand. WARNING Do not use oil or grease on the wheel studs or nuts when the spare tire is installed. This could cause the nuts to become loose and lead to an accident. 13. Turn the jack handle counterclockwise to lower the vehicle. on the wrench because you may exceed the specified torque. Have the wheel nut torque checked at the nearest automotive service facility. Models with P205/60R16 tires 11. Before putting the spare tire on, clean the mounting surface of the wheel and hub with a cloth. 12. Put on the spare tire. Replace the 14. Use the wheel nut wrench to securely tighten the wheel nuts to the specified torque, following the tightening order in the illustration. For the wheel nut tightening torque, refer to "Tires" F12-9. Never use your foot on the wheel nut wrench or a pipe extension Others