2012 Subaru Legacy Owner's Manual - Page 397
2012 Subaru Legacy Manual
Page 397 highlights
Starting and operating 7-21 & Selection of manual mode 3. While depressing the brake pedal, insert the electronic parking brake release tool into the hole, press the shift lock release button using the tool, and then move the select lever. With the vehicle either moving or stationary, move the select lever from the "D" position to the "M" position to select the manual mode. 1) 2) 3) Upshift indicator Downshift indicator Gear position indicator NOTE To prevent damage to the shift lock cover, cover the tip of the flat-head screwdriver with vinyl tape or a cloth before removing the cover. If the select lever does not move after performing the above procedure, the shift lock system may be malfunctioning. Contact a SUBARU dealer for an inspection as soon as possible. When the manual mode is selected, the gear position indicator and upshift indicator and/or downshift indicator on the combination meter illuminate. The gear position indicator shows the currently selected gear in the 1st-to-5th-gear range (AT models) or 1st-to-6th gear range (CVT models). The upshift and downshift indicators show when a gearshift is possible. When the upshift indicator " " is on, upshifting is possible. When the downshift indicator " " is on, downshifting is possible. When both indicators are on, upshifting and downshifting are both possible. When the vehicle stops (for example, at traffic signals), the downshift indicator - CONTINUED -