2012 Subaru Legacy Owner's Manual - Page 211
2012 Subaru Legacy Manual
Page 211 highlights
Keys and doors 2-23 ! Operating the windows & Initialization of power window If the vehicle's battery is disconnected due to situations such as battery or fuse replacement, the following functions are deactivated. . One-touch auto up/down function . Anti-entrapment function (if equipped) Initialize the power window in the following procedure to reactivate such functions. 1. Close the driver 's door. 2. Turn the ignition switch to the "ON" position. 3. Open the driver 's side window halfway by pushing down the power window switch. 4. Pull up the power window switch and close the window completely. Continue pulling up the switch for approximately 1 second after the window is closed completely. Trunk lid (Legacy) WARNING . To prevent dangerous exhaust gas from entering the vehicle, always keep the trunk lid closed while driving. . Help prevent children, adults or animals from locking themselves in the trunk. On hot or sunny days, the temperature in the trunk could quickly become high enough to cause death or serious heat-related injuries including brain damage to anyone locked inside, particularly for small children. . When leaving the vehicle, close all windows and lock all doors. Also make certain that the trunk is closed. To open: Press the switch down and hold it until the window reaches the desired position. To close: Pull the switch up and hold it until the window reaches the desired position. When the lock switch on the power window switch cluster, located on the driver 's side door, is in the lock position, the passengers' windows cannot be operated with the passengers' switches. & To open and close the trunk lid from outside The trunk lid can be opened using the remote keyless entry system. Refer to "Opening the trunk lid (Legacy)" F2-9. To close the trunk lid, lightly press the - CONTINUED -