2012 Subaru Legacy Owner's Manual - Page 295

Audio 5-13 interval can be changed between 10 kHz in the AM mode and 0.2 MHz in the FM mode. ! Stereo indicator (type A and B audio) The stereo indicator "ST" will illuminate when an FM stereo broadcast is received. ! Seek tuning (SEEK) Type A audio: Type B audio: Seek up ! Scan tuning (SCAN) Type A audio Seek down Type B audio Type C audio: Seek up Type C audio Seek down If you press the indicated button briefly, the radio will automatically search for a receivable station and stop at the first one it finds. This function may not be available when radio signals are weak. When this happens, perform manual tuning to select the preferred station. 1) 2) Seek up Seek down If you press the "SCAN" button, the radio will switch to the scan mode. In this mode, the radio scans through the radio band until a station is found. The radio will briefly stop at the station while displaying the frequency, after which scanning will continue until the entire band has been scanned. Press the "SCAN" button again to cancel the SCAN mode. If you press the "SCAN" button while the radio is stopped at a station, the radio stays stopped at that station. If you press the button while the radio is scanning, the radio stops at the next receivable station (type A and C audio)/The radio stops at a frequency when the "SCAN" button is pressed (type B audio). Automatic tuning may not function prop- CONTINUED -