2012 Subaru Legacy Owner's Manual - Page 489

Maintenance and service 11-19 1. Remove the hydraulic hose in the power steering system from the clip on the right side of the air cleaner case. 2. Unplug the connector that is attached to the top of the air cleaner case. 3. To remove the connector cable from the air cleaner case, remove the clip that is attached to the connector cable from the guide lug on the right side of the air cleaner case. 4. Loosen the screw on the clamp. 5. Unsnap the two clips holding the air cleaner case cover. ! Turbo models 8. To install the air cleaner case, insert the three projections on the air cleaner case into the slits on the air cleaner case cover. 9. Install the removed or loosened parts in the reverse order of removal. 6. Open the air cleaner case and remove the air cleaner element. 7. Clean the inside of the air cleaner case and case cover with a damp cloth and install a new air cleaner element. 1) 2) 3) Air intake duct Air cleaner case Clamp 1. Remove the hydraulic hose in the power steering system from the clip on - CONTINUED -