2012 Subaru Legacy Owner's Manual - Page 523
2012 Subaru Legacy Manual
Page 523 highlights
Maintenance and service 11-53 ! Outback 4. Install a new bulb. 5. Reinstall the lens. 6. Tighten the mounting screws. & Dome light 1. Remove the mounting screws using a Phillips screwdriver. 2. Remove the lens. 1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Turn the bulb until the flat surfaces at its ends are aligned vertically. 3. Pull the bulb straight downward to remove it. 4. Install a new bulb. 5. Reinstall the lens. 3. Pull the bulb out of the socket. - CONTINUED -
!
Outback
1.
Remove the mounting screws using a
Phillips screwdriver.
2.
Remove the lens.
3.
Pull the bulb out of the socket.
4.
Install a new bulb.
5.
Reinstall the lens.
6.
Tighten the mounting screws.
&
Dome light
1.
Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
2.
Turn the bulb until the flat surfaces at
its ends are aligned vertically.
3.
Pull
the
bulb
straight
downward
to
remove it.
4.
Install a new bulb.
5.
Reinstall the lens.
Maintenance and service
11-53
–
CONTINUED
–