Acer G330 Configuration Guide - Page 52

11. Select Source under Development in the left window and check kernelsource in the right window to add kernel-source. 12. After you add the kernel-source and C/C++ Compiler and Tools, please click on Accept and follow the instruction to complete the installation. Gigabit Ethernet Driver Installation The SUSE Linux Enterprise Linux 10 could detect the onboard Intel 82573E automatically. We still recommend replacing the driver with the one in EasyBUILD 7.1 build 600 (or later). 1. Remove the module e1000 # rmmod e1000 2. Make the driver diskette for EasyBUILD 7.1 build 600 (or later). 3. Copy driver from floppy to hard disk # mount /media/floppy # cp -R /media/floppy/. /tmp/ 4. Change the directory to the driver source and install the driver # cd /tmp/src/ # make install # insmod e1000.ko Onboard SATA RAID Utility Setup 1. Copy the utility Spy.i386.rpm from the EasyBUILD build 600 (or later) to HDD. Please refer to the Software Required section to find the utility in the EasyBUILD. 2. Install the Spy.i386.rpm # rpm -ivh Spy.i386.rpm SUSE Linux Enterprise Server 10 Installation (with Adaptec SAS 44300 HostRAID) Below information describes how to manually install SUSE Linux Enterprise Server 10 on Altos G330 with add-on Adaptec SAS 44300 HostRAID. Drivers Required For SUSE Linux Enterprise Server 10 Installation, the following device drivers are required. These drivers can be found in EasyBUILD 7.1 build 600 (or later) Device Version Directory on EasyBUILD Onboard ATI N/A ES1000 OS built-in Onboard Intel 3000 N/A No Driver Altos G330 Installation Configuration Guide 42