Acer G330 Configuration Guide - Page 93
Configuring Adaptec SAS 44300 HostRAID, APPENDIX C: ADAPTEC, SAS 44300 HOSTRAID, CREATION
UPC - 750519177044
View all Acer G330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
APPENDIX C: ADAPTEC SAS 44300 HOSTRAID CREATION Configuring Adaptec SAS 44300 HostRAID This section briefly shows how to create RAID 1 with Adaptec SAS 44300 HostRAID. Starting SAS Configuration Utility To start Adaptec SAS/SATA Configuration Utility, press CTRL-A when you see the Adaptec Serial Attached SCSI (SAS) BIOS during POST. Create RAID1 volume 1. Select Array Configuration Utility in the Options. 2. Select Create Array in the Main Menu of Array Configuration utility. 3. Press the arrow keys to choose specific physical drives and press spacebar to associate the selected drive with the current array. The select drives will be added to the right field. 4. After you select the drives, press Enter to configure the Array Properties. 5. Select RAID 1(Mirror) and press Enter. 6. Specify the name for the RAID volume and press Enter. 7. Select Quick Init to create the RAID. 8. Press Enter on Done to completed the RAID creation. Assigning a Hot Spare Disk 1. Select Add/Delete Hotspare in the Main Menu of Array Configuration utility. 2. Press the arrow keys to choose specific physical drives and press spacebar. The selected drive will be added to the right field. 3. Press Enter then Y to create the spare. 4. Press Y again to confirm creating the spare. 5. Now you can press ESC to exit the Adaptec SAS/SATA Configuration utility and start to install OS. 83 Altos G330 Installation Configuration Guide