Acer G330 Configuration Guide - Page 87
by NetWare 6.5 Support Pack 6. Please move cursor to ADPAHCI.HAM
UPC - 750519177044
View all Acer G330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
install. 7. At Prepare boot partition page, just select continue to use the DOS partition we created. 8. When you see the following message, please select Modify. Move the cursor to Storage adapters and press Enter. The following device drivers were detected for this server. Add, change, or delete device drivers as needed. Device types HotPlug Support Module: Storage adapters: Driver names optional) IDEATA ADPAHCI 9. After you pressing the Enter, you would see the storage adapter detected by NetWare 6.5 Support Pack 6. Please move cursor to ADPAHCI.HAM and press Delete to remove the driver. Add, edit, or delete storage drivers. Each controller/adapter requires a driver. Driver name -----------IDEATA.HAM ADPAHCI.HAM Device Name Standard ATA/IDE/ATAPI Adapter Adaptec ICH 7R RAID Controller Stat ---- 10. To apply the driver for onboard LSI SATA RAID, please press INSERT key twice, insert the driver disk for onboard LSI SATA RAID into floppy and press Enter. 11. After the driver is successfully loaded, you would see the devices listed as below. Then, please select Return to driver summary. Add, edit, or delete storage drivers. Each controller/adapter requires a driver. Driver name Device Name Stat IDEATA.HAM Standard ATA/IDE/ATAPI Adapter MEGARIDE.HAM Intel Embedded Server RAID Technology 12. You would see the following message. Please select Continue to continue the installation. The following device drivers were detected for this server. Add, change, or delete device drivers as needed. 77 Altos G330 Installation Configuration Guide