Acer G330 Configuration Guide - Page 67

SUSE Linux Enterprise Server 9 Service Pack 3 (with onboard LSI SATA RAID) Below information describes how to manually install SUSE Linux Enterprise Server 9 Service Pack 3 on Altos G330 with onboard LSI SATA RAID. Drivers Required For SUSE Linux Enterprise Server 9 Service Pack 3 Installation, the following device drivers are required. Device Version Directory on Resource CD Onboard ATI N/A ES1000 OS built-in Onboard Intel 3000 N/A Chipset No Driver Onboard LSI SATA RAID 5.09a \Disk\G330\raid\LSI\sles9sp3 Onboard Intel 82573E Gigabit Ethernet 7.2.7-NAPI \Disk\G330\NIC\Intel\pro1000.lx Onboard USB 2.0 N/A OS built-in Software Required The management utility of onboard LSI SATA RAID can be found in the G330 Resource CD build 100(or later). Software Version Directory on Resource CD Onboard SATA RAID Monitor Utility 1.11.0 \APP\G330\SATARAID\Monitor\linux\ Configuring onboard LSI SATA RAID Please refer to the Appendix B. for the onboard LSI SATA RAID configuration. Installation Tips 1. Since SUSE Linux Enterprise Server 9 Service Pack 3 cannot recognize the onboard LSI SATA RAID, you need to make a driver diskette from the G330 Resource CD build 100 first before the installation. 2. Boot the system form SUSE Linux Enterprise Server 9 Service Pack3 bootable CD. 3. When you see the boot menu on the screen, press F6, select Installation then press Enter to continue. 4. Follow the instruction to load the onboard LSI SATA RAID driver from the driver diskette. 5. After loading the driver, select Back to return the installation procedure. 57 Altos G330 Installation Configuration Guide