Acer G330 Configuration Guide - Page 83
Storage adapters, IDEATA ADPAHCI
UPC - 750519177044
View all Acer G330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Software Required The management utility of onboard LSI SATA RAID will be included in the EasyBUILD 7.1 build 600 (or later). Software Version Directory on EasyBUILD Onboard LSI SATA 7.29 RAID monitor utility The utility will be included in the EasyBUILD 7.1 build 600 or later. You can find the utility on GCSD website, too. http://csd.acer.com.tw Configuring onboard LSI SATA RAID Please refer to the Appendix B. for the onboard LSI SATA RAID configuration. Installation Tips 1. Download and make the driver disks for onboard LSI SATA RAID and 82573E Gigabit Ethernet. 2. Boot the system from the NetWare 6.5 Support Pack 6 OS CD. 3. At Welcome to the NetWare 6.5 server installation page, select Manual to install. 4. At Prepare boot partition page, create one 500 MB DOS partition. 5. When you see the following message, please select Modify. Move the cursor to Storage adapters and press Enter. The following device drivers were detected for this server. Add, change, or delete device drivers as needed. Device types HotPlug Support Module: Storage adapters: Driver names optional) IDEATA ADPAHCI 6. After you pressing the Enter, you would see the storage adapter detected by NetWare 6.5 Support Pack 6. Please move cursor to ADPAHCI.HAM and press Delete to remove the driver. Add, edit, or delete storage drivers. Each controller/adapter requires a driver. Driver name -----------IDEATA.HAM ADPAHCI.HAM Device Name Standard ATA/IDE/ATAPI Adapter Adaptec ICH 7R RAID Controller Stat ---- 7. To apply the driver for onboard LSI SATA RAID, please press INSERT key 73 Altos G330 Installation Configuration Guide