Acer G330 Configuration Guide - Page 79

5. During the installation, you would see the default Platform Support Modules would be set to MPS14 as following. You need to update it to ACPI with ACPI PSM module update patch after OS installation completed. The following device drivers were detected for this server. Add, change, or delete device drivers as needed. Device types Platform Support Module: Driver names MPS14 6. When you see the following message, please select Modify. Move the cursor to Storage adapters and press Enter to apply the driver for Adaptec SAS 44300. The following device drivers were detected for this server. Add, change, or delete device drivers as needed. Device types HotPlug Support Module: Storage adapters: Driver names optional) IDEATA IDEATA IDEATA 7. After you pressing the Enter, you would see the storage adapter detected by NetWare 6.5 SP5. Add, edit, or delete storage drivers. Each controller/adapter requires a driver. Driver name -----------IDEATA.HAM IDEATA.HAM IDEATA.HAM Device Name Standard ATA/IDE/ATAPI Adapter Standard ATA/IDE/ATAPI Adapter Standard ATA/IDE RAID Adapter Stat ---- 8. Please press INSERT key twice, insert the driver disk for Adaptec SAS 44300 into floppy and press Enter. It will show the driver on the disk as following. Please press Enter again to select the driver to install. Select a driver to install ADP94XX.HAM Adaptec HostRAID SAS/SATA Driver 9. When you see the following message to ask you to verify/enter the driver properties, just select Return to driver list. Verify/Enter the driver properties so that they match the hardware in this server 69 Altos G330 Installation Configuration Guide