Belkin F5D7633uk4 F5D7633uk4A - Manual - Page 37
Setting your Connection Type to Modem Only Disable, Internet Sharing, VPI/VCI, Encapsulation, DNS
View all Belkin F5D7633uk4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Manually Configuring your Router section 1 Setting your Connection Type to Modem Only (Disable Internet Sharing) In this mode, the Router simply acts as a bridge passing packets 2 across the DSL port. It requires additional software to be installed on your computers in order to access the Internet. 3 4 (1) 5 6 1. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. (Assigned by your ISP). 7 2. Encapsulation - Select LLC or VC MUX. (Assigned by your ISP). 8 DNS (Domain Name Server) Settings A "Domain Name Server" is a server located on the Internet that 9 translates Universal Resource Links (URLs) like "www.belkin.com" to IP addresses. Many ISPs do not require you to enter this information 10 into the Router. The "Automatic from ISP" box (1) should be checked if your ISP did not give you a specific DNS address. If you are using a static IP connection type, then you may need to enter a specific 11 DNS address and secondary DNS address for your connection to work properly. If your connection type is dynamic or PPPoE, it is likely that you do not have to enter a DNS address. Leave the "Automatic from 12 ISP" box checked. To enter the DNS address settings, uncheck the "Automatic from ISP" box and enter your DNS entries in the spaces provided. Click "Apply Changes" (2) to save the settings. (1) (2) 35