Brother International DCP 8045D Network Users Manual - English - Page 24
IBM AS/400, To use a Brother Print/Fax server with an IBM AS/400 running IBM's
UPC - 012502610335
View all Brother International DCP 8045D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
SCO UNIX requires TCP/IP V1.2 or later to work with Brother print servers. You must first configure the /etc/hosts and /etc/ printcap files as described in step 2. Then run the sysadmsh program as follows: 1 Select Printers. 2 Select Configure. 3 Select Add. 4 Enter the name of the print queue you entered in the /etc/ printcap file as the Printer name. 5 Enter anything as the Comment, and Class name. 6 For the Use printer interface select Existing. 7 Press the F3 key to get a list of available interfaces, and select the desired one as the Name of interface using the cursor keys (Dumb is a good choice). 8 Select Direct as the Connection. 9 Enter the desired Device name (/dev/lp generally works). 10 Select Hardwired as the Device. 11 Select No for the Require banner field. Older SCO Unix Systems The Brother NC-9100h Print/Fax servers support the FTP protocol. Earlier SCO Unix systems are often configured to print using the FTP protocol. IBM AS/400 To use a Brother Print/Fax server with an IBM AS/400 running IBM's TCP/IP gateways services for OS/400 (the OS/400 system must be v3.1 or later) Use the CFGTCP command at your OS/400 prompt to add the Print/ Fax server's TCP/IP address to the AS/400 host table. UNIX PRINTING 1 - 11