Brother International DCP 8045D Network Users Manual - English - Page 95
Gateway, Host Name, 6 FRONT PANEL SETUP MENU
UPC - 012502610335
View all Brother International DCP 8045D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Gateway This field displays the current gateway or router address used by the DCP/MFC. If you are not using DHCP or BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a gateway or router, leave this field blank. Check with your network manager if you are unsure. 1 (For MFC) Press Menu, 6, 1, 4. (For DCP) Press Menu, 4, 1, 4. 2 Select 1 to change. Enter the Gateway address. 3 Press Set. 4 Press Stop/Exit. Host Name You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will be the name that is registered by the WINS server on your network. Brother recommends the name BRN_XXXXXX (where XXXXXX is the last six digits of the Ethernet address) (up to 15 characters). 1 (For MFC) Press Menu, 6, 1, 5. (For DCP) Press Menu, 4, 1, 5. 2 Select 1 to change. Enter the Host Name. 3 Press Set. 4 Press Stop/Exit. 10 - 6 FRONT PANEL SETUP MENU