Brother International DCP 8045D Network Users Manual - English - Page 86

5 A list of available Print/Fax server MAC addresses (Ethernet addresses) appears in the larger box under Card Address. Select the address of the desired Print/Fax server (you can see the Ethernet address on the printer configuration page). You can find the node name and MAC address by printing out the printer configuration page. For information on how to print the configuration page on your print server, see Resetting the Print/ Fax Sever back to factory settings (Test Switch) on page 13-4. 6 The selected Print/Fax server address will then appear in the smaller box under Card Address. 7 Type in any desired name for the port (the name must not be the name of an existing port or DOS device, such as LPT1) and click OK then on the Printer Ports screen, click Close. 8 The name you selected in the above step will appear as a checked port in the list of available ports. Click Next. 9 Select the correct driver. Click Next. 10 Give a name to the printer. If desired, select the printer as the default. 11 Select Shared or Not Shared. If shared, specify the share name and the operating systems that will be printing to it. 12 Select whether or not you want to print a test page, and then select Finish. Configuring DLC on Other Systems To use DLC on other network systems, you will generally need vendor-supplied software. Typically such software will support the Brother Print/Fax servers. Follow the vendor's instructions to install the DLC protocol on your system. Once the protocol is installed, create a network port in the same way that you did for Windows NT®4.0 in the previous sections. The MAC address (Ethernet address) of the Print/Fax server should automatically appear during the configuration process. DLC PRINTING 8 - 4