Brother International DCP 8045D Network Users Manual - English - Page 91
Setup TCP/IP, BOOT Method, Stop/Exit
UPC - 012502610335
View all Brother International DCP 8045D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Setup TCP/IP This menu has nine sections: Boot Method, IP Address, Subnet Mask, Gateway, Host Name, WINS Config, WINS Server, DNS Server and APIPA. BOOT Method 1 (For MFC) Press Menu, 6, 1, 1. (For DCP) Press Menu, 4, 1, 1. 2 Press or to select Auto, Static, RARP, BOOTP or DHCP. 3 Press Set. 4 Press Stop/Exit. Static mode In this mode the DCP/MFC IP address must be manually assigned. Once entered the IP address is locked to the assigned address. Auto mode In this mode, the machine will scan the network for a DHCP server, if it can find one, and if the DHCP server is configured to allocate an IP address to the machine, then the IP address supplied by the DHCP server will used. If no DHCP server is available, then the machine will scan for a BOOTP server. If a BOOTP server is available, and it is configured correctly, the machine will take its IP address from the BOOTP server. After it is initially powered ON, it may take a few minutes for the machine to scan the network for a server. The machine supports "POWER SAVE mode" and you are using the AUTO Boot mode, POWER SAVE must be set to OFF. 10 - 2 FRONT PANEL SETUP MENU