Brother International MFC 7440N Network Users Manual - English - Page 33

Apipa, Ipv6

Page 33 highlights

Control panel setup APIPA 3 The setting of On will cause the print server to automatically allocate a Link-Local IP address in the range (169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the BOOT Method you have set (see BOOT Method on page 18). Choosing Off means the IP address doesn't change, when the print server cannot obtain an IP address through the BOOT Method you have set. a Press Menu. 3 b Press a or b to choose LAN. Press OK. c Press a or b to choose TCP/IP. Press OK. d Press a or b to choose APIPA. Press OK. e Press a or b to choose On or Off. Press OK. f Press Stop/Exit. IPv6 3 This machine is compatible with IPv6, the next generation internet protocol. If you want to use the IPv6 protocol, choose On. The default setting for IPv6 is Off. For more information on the IPv6 protocol, visit http://solutions.brother.com/. a Press Menu. b Press a or b to choose LAN. Press OK. c Press a or b to choose TCP/IP. Press OK. d Press a or b to choose IPv6. Press OK. e Press a or b to choose On or Off. Press OK. f Press Stop/Exit. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

Control panel setup
25
3
APIPA
3
The setting of
On
will cause the print server to automatically allocate a Link-Local IP address in the range
(169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the BOOT
Method you have set (see
BOOT Method
on page 18). Choosing
Off
means the IP address doesn’t change,
when the print server cannot obtain an IP address through the BOOT Method you have set.
a
Press
Menu
.
b
Press
a
or
b
to choose
LAN
.
Press
OK
.
c
Press
a
or
b
to choose
TCP/IP
.
Press
OK
.
d
Press
a
or
b
to choose
APIPA
.
Press
OK
.
e
Press
a
or
b
to choose
On
or
Off
.
Press
OK
.
f
Press
Stop/Exit
.
IPv6
3
This machine is compatible with IPv6, the next generation internet protocol. If you want to use the IPv6
protocol, choose
On
. The default setting for IPv6 is
Off
. For more information on the IPv6 protocol, visit
.
a
Press
Menu
.
b
Press
a
or
b
to choose
LAN
.
Press
OK
.
c
Press
a
or
b
to choose
TCP/IP
.
Press
OK
.
d
Press
a
or
b
to choose
IPv6
.
Press
OK
.
e
Press
a
or
b
to choose
On
or
Off
.
Press
OK
.
f
Press
Stop/Exit
.